JetFly 5 m open-airflow wind tunnel, concept render v3.1 — revised duct geometry with green equipment blocks
JetFly 5 m open-airflow wind tunnel, concept render v2.1 — with green base plate and stair structure
JetFly 5 m open-airflow wind tunnel, concept render v1.1 — twin curved ducts and central elevated platform
Engineering drawing of the Glide 4.0 extended closed-loop inclined circuit, isometric and plan views
Engineering drawing of the Banana WS single-loop inclined wind-tunnel circuit, plan and elevation views
Ski jumper in the aerial flight position inside the Banana WS chamber, seen from behind with skis in the V-style
Wide view of the inclined wind-tunnel structure with a ski jumper in flight and a coaching team on the balcony
Coaching team reviewing a ski jumper in flight from the viewing deck, with camera-based flight analysis on screens
Banana WS inclined flight chamber seen from above, with spectators on the viewing platform
Close-up of a ski jumper in the aerial position with skis in the V-style, inside the Banana WS chamber
Ski jumper in flight position on skis inside the Banana WS inclined flight chamber, suspended from the overhead safety line
Instructor assisting a wingsuit flyer at the entry of the Banana WS flight chamber
Two wingsuit pilots flying side by side inside the inclined glass flight chamber of the Banana WS
Wingsuit pilot flying inside the inclined glass flight chamber of the Banana WS, seen from the entry end
Banana WS inclined wind tunnel — cutaway render of the complete single-loop circuit: fan section, ducts, turning vanes and inclined flight chamber
Scale comparison of high-subsonic test sections from a 0.5 m cube up to 4 x 4 x 4 m, against a 1.8 m human figure
Scale comparison of low-speed test sections from a 0.5 m cube up to 8 x 6 x 6 m, against a 1.8 m human figure
Engineering drawing sheet of a vertical-return wind-tunnel configuration reducing the required floor area
Engineering drawing sheet of a climate-capable wind-tunnel configuration with chiller and cooling systems integrated into the circuit
Engineering drawing sheet of a large full-aircraft wind-tunnel configuration with plan, elevation and isometric views
Engineering drawing sheet of a compact research wind-tunnel configuration for components, propulsion and small UAVs
Dark wind-tunnel hall with a large axial fan and a fixed-wing UAV on the floor, concept render
Research wind-tunnel hall: UAV in the test section, camera on a tripod and a measurement workstation with drawings
Laser cutting head cutting a large sheet-metal component for wind-tunnel structure, Stuttgart
Multirotor UAV under combined wind, water and particulate loading in a wind-tunnel test section
Multirotor UAV under thermal conditioning with radiant heat in a wind-tunnel test section
Multirotor UAV under low-temperature and icing conditions in a wind-tunnel test section
Multirotor UAV in sand- and dust-laden airflow inside a wind-tunnel test section
Multirotor UAV under heavy rain and water spray in a wind-tunnel test section
Multirotor UAV under a gusting wind profile in a wind-tunnel test section, airflow shown as streamlines
Fixed-wing interceptor UAV mounted on a powered test rig inside a wind-tunnel test section